Cast Steel Trunnion Ball Valve

Cast Steel Trunnion Ball Valve

ZhengFeng's cast steel trunnion mounted ball valve has been designed two piece body type or three piece body type and with two floating seats, which are movable under the pressure of medium. 

Payment Protection
On-time Shipment
Quality Protection


The cast steel trunnion mounted ball valve has been designed two piece body type or three piece body type and with two floating seats, which are movable under the pressure of medium. Under the bottom of seats, seat pre-loading springs are positioned to ensure two floating seats can attach the ball’s surface tightly, other more, pressure of medium also can push seats to attach ball tightly to ensure sealing more reliable.

The cast steel trunnion ball valve is equipped with a movable seat seal ring which can generate displacement under the pressure of medium. In case that any medium pressure exists, the pressure will press the valve seat seal ring onto the ball tightly, guaranteeing the sealing performance of the ball valve. 

Upon request, sealant lubrication fittings are installed. In the event of seat insert or stem seal damage, external or internal leakage can occur. Emergency sealant injection can save the integrity of the valve by incorporating a sealant seal around the stem or between the seat and the ball until such time the valve may be properly serviced. The spring provided at the stem allow the static charges to be led to the piping. In this way, an electrostatic charging of the ball is eliminated. The stem is independent of the ball and is a blow-out proof design. As an integral part, a stem has a flange at its lower side. Owing to such a specific design, the stem flange prevents the stem from blowing out. This feature also allows replacement of the ball by generously proportioned mating joint, hence the stem is not affected by the side thrust.



1. Simple structure with good sealing performance and small torque;

2. Full bore and reduced bore design with the minimum flow resistance (zero actually);

3. Emergency sealant injection;

4. Cavity pressure self relief

5. Independent ball and stem

6. Low emission packing

7. Fire safe, anti-static and anti-blowout stem design

8. Optional extended bonnet.

Product Range:

Body material: carbon steel, stainless steel, alloy steel

Nominal diameter:1/2”~60

Pressure range: Class150 – 2500

End Connection: RF, RTJ, BW

Working temperature:-46℃~+200

Operation: Wrench, worm gear, electric, pneumatic, gas over oil actuator and electro-hydraulic actuator



Valve Type

Cast Steel Trunnion Ball Valve

Valve Material

Cast steel, stainless steel, special  alloy, etc

Valve Test

100% quantity tested before delivery

Valve Guarantee

18 months from the date of dispatch ex works,   or 12 months from date of commodity installation.

Valve Painting

Customer request

Valve Package

Wooden case


No requirement

Valve Certificate

API 6D/CE/ISO9001/ISO14001

Delivery Detail

Shipped in 4 or 6 weeks after payment



Payment Terms


Certificate Offered

Packing List,Commercial   Invoice,Test Reports and Material Certificates,Certificate   of quality and quantity, Seller’s Certificate of Guarantee

Welcome to our website! Please feel free to send us your inquiry in detail, we will reply you as soon as possible.

Related products